Handcrafted
Wood Burners
• Made in New Zealand •
There are more than 1000 Meg wood-burners out there now in New Zealand and Australia
each one hand-crafted with exceptional attention to detail.
Meg fires next available production date is:
October-28-2024
Fire Pits and Sweaty Megs production time is:
6-8 weeks
The Mini Meg Wood Burner is suitable for the smallest of small spaces. You can even cook on her.
The Roaring Meg Wood Burner is still small, but has nearly double the heat output of her little sister. She is tested to AS/NZS 2918:2018 standards and can be permitted.
The new Roaring Meg Eco Low Emission Clean Air Wood Burner is tested to AS/NZS 4013:2014 & 4012:2014 standards and can be installed where LEB fires are required.
The Mighty Meg unit is tested to AS/NZS 2918:2018 standards and can be permitted.
-
Made from 6mm steel
-
Ash draw pan
-
Removable 10mm fire grate
-
EST 13KW output
-
Good for heating 5-15m2
-
Sizes 830H x 550W x 600D
-
Weight 110kg
-
Made from 6mm steel
-
Ash draw pan
-
Removable 10mm fire grate
-
EST 7KW output
-
Good for heating 5m2 2-4 person sauna.
-
Sizes 730H x 420W x 500D
-
Weight 65kg
-
Eco Friendly
-
Made from 3mm Corten Steel
-
Pre heated air wash resulting in minimal to no smoke
-
10mm removable fire grate
-
Ash pan draw for easy cleaning
-
Lid for weather protection when not in use
Common Queries
Be in the Know
What Size Is TheFireplace?
Roaring Meg
260W x 320H x 350D ( - heat shield)
320W x 320H x 380D (+ heat shield)
48kgs
Output 7-8KW
Mini Meg
200W x 250H x 280D (- heat shield)
250W x 250H x 305D (+ heat shield)
28kgs
Output 4-5KW
Roaring Meg Eco
260W x 660H x 350D (+ heat shield and base)
65kgs
Output 4.8-7.5KW
Mighty Meg
370W x 830H x 450D
92kg
Output 13-14kW
How Long Does It Take
To Make?
One week from production date
Are Your Fires Certified?
The Mighty Meg, Roaring Meg and Mini Meg unit is now tested to AS/NZS 2918:2018
These units are NOT Clean Air Approved which is not a requirement when being installed in movable accommodation.
The new Roaring Meg Eco Low Emission Clean Air Wood Burner is tested to AS/NZS 4013:2014 & 4012:2014 standards and can be installed where LEB fires are required.
